Peerless Industries DS-VW760 TV Mount User Manual


  Open as PDF
of 14
 
E
G
Installation to Wall Stud
Useastudndertolocatetheedgesofthestud.Useofanedge-to-edgestudnderishighlyrecommended.
Based on their edges, draw a vertical line down the stud center. Place video wall mount assembly on wall as a
template. Level plate, and mark the center of the four mounting holes. Make sure that the mounting holes are on
thestudcenterline.Drillfour5/32"(4mm)dia.holes2-1/2"(65mm)deep.Makesurethatthevideowallmount
assemblyislevel,secureitusingfour#14x2.5"woodscrews(E)andfenderwashers(G)asshownbelow.
• Installermustverifythatthesupportingsurfacewillsafelysupportthecombinedloadoftheequipmentandall
attached hardware and components.
• Tightenwoodscrewssothatwallplateisrmlyattached,butdonotovertighten.Overtighteningcandamagethe
screws, greatly reducing their holding power.
• Nevertighteninexcessof80in.•lb(9N.M.).
• Makesurethatmountingscrewsareanchoredintothecenterofthestud.Theuseofan"edgetoedge"studnder
is highly recommended.
• Hardwareprovidedisforattachmentofmountthroughstandardthicknessdrywallorplasterintowoodstuds.Install-
ers are responsible to provide hardware for other types of mounting situations.
WARNING
3
VIDEOWALL
MOUNTASSEMBLY
ISSUED: 04-23-10 SHEET #: 145-9010-2 04-27-10
6 of 14
 previous next