Filter
Top Products
11 of 46
ISSUED: 01-15-08 SHEET #: 095-9282-2 06-12-09
If more or less tension is desired in the arm pivot
points, do the following:
• To increase tension, turn tension screw(s) clockwise
with 3/16" allen wrench.
• To reduce tension, turn tension screw(s) counter-
clockwise with 3/16" allen wrench.
NOTE: Do not turn tension screws more than half
a turn.
Arm Tension Adjustment
8
TENSION
SCREWS
• Do not remove screw or loosen screw until it is no longer engaged with the mount. Doing so may cause the screen
to fall.
WARNING
© 2009, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.
Peerless Industries, Inc.
3215 W. North Ave.
Melrose Park, IL 60160
www.peerlessmounts.com