Filter
Top Products
8 of 46
ISSUED: 01-15-08 SHEET #: 095-9282-2 06-12-09
Attaching Hook Bracket to Screen with VESA
®
75 or 100 Mounting Pattern
FOR VESA
®
75 MOUNTING PATTERN:
Choose hole pattern as shown below. Attach hook
bracket (M) to back of screen using four M4 x 10
mm screws (E) as shown below.
*NOTE: If hole pattern is in a pocket, attach hook
bracket (M) to back of screen using four M4 x 20
mm screws (F) and four retaining spacers (C) as
indicated below.
E
FOR VESA 100 MOUNTING PATTERN:
Choose hole pattern as shown below. Attach hook
bracket (M) to back of screen using four M4 x 10
mm screws (E) as shown below.
3
M
M
• If screws don't get three complete turns in the screen inserts or if screws bottom out and bracket is still not tightly
secured, damage may occur to screen or product may fail.
WARNING
GENERIC ADAPTER
BRACKET
M5 X 10 MM SCREW
M
NOTE: Refer to PLP model adapter bracket instruction
sheet for attachment of adapter bracket to screen.
NOTE: M5 x 10 mm screws are included with the PLP
model adapter bracket
Attach hook bracket (M) to adapter bracket using four
M5 x 10 mm screws.
3
FOR INSTALLING TO PEERLESS PLP MODEL ADAPTER BRACKET
For screen compatibility please refer to the LCD or plasma interface list on our website www.peerlessmounts.com or
call customer care for a screen specifi c PLP adapter bracket models (not UL evaluated).
E
*For screens with a
hole pattern in a pocket,
spacers (C) go between
hook plate (M) and
screen.
C