Filter
Top Products
12 C2943M-B (1/09)
OSD FUNCTION
INPUT SOURCE DISPLAY
Figure 6. Input Source Display Screen
The input source is displayed in the upper-right corner, where it can be changed. It can be changed using the Source button on the monitor or
using the buttons on the remote control (when the OSD Mode Label is set to ON). The default setting is OFF.
To use the menus:
1. Press the MENU button to access the Main menu.
2. Use the up and down arrow buttons (# and $) to highlight a selection.
3. Press ENTER to select an item.
4. Use the up and down arrow buttons (# and $) to highlight a selection.
5. Use the "/VOL- and !/VOL+ arrow buttons to adjust the setting of a selected item.
MAIN MENU
Figure 7. Main Menu
VIDEO 1
VIDEO1
VIDEO2
CAMERA
MEDIA
PICTURE
Brightness
VIDEO-1 NTSC
50
Contrast 50
Sharpness 9
Color 50
Tint 50
Color Temp
Red 50
Green 50
Blue 50
User
SCREEN
SET UP
PVM SETUP
CYCLE SETUP
CAMERA
Maintenance