Pelco C2943M-B Home Theater Screen User Manual


 
22 C2943M-B (1/09)
CAMERA INSTALLATION AND CAMERA ADJUSTMENT
1. Plug the two camera connection leads from inside the monitor into the connectors on the camera. These connectors are keyed and only fit
in the correct receptacles, so confusing the connectors is not possible.
2. Attach the camera using three spacers and three screws (14 mm). Do not overtighten the screws or the spacers will collapse. The focus
knobs need to be positioned as shown in Figure 15.
3. Tuck the camera leads neatly into the monitor.
4. Verify the video on the monitor. If satisfactory, skip to step 6.
5. The camera focus and zoom come from the factory with a medium setting. They can be adjusted with the built-in camera located inside the
monitor. Refer to Figure 15.
To adjust the camera zoom, adjust the zoom and lightly tighten the focus knob.
Figure 15. Adjusting the Camera
6. Close the door and hand-tighten the door thumbscrew.