Filter
Top Products
C2968M-A (10/09) 7
Description
The KBD300USBKIT is a required accessory if you want to interface the KBD300A keyboard to the DX4500/DX4600 Series digital video recorder
(DVR). The KBD300USBKIT is also required to control certain functions of the Digital Sentry
®
(DS) ControlPoint software.
This manual describes how to install and operate the KBD300A with the DX4500/DX4600 DVR and DS ControlPoint.
DX4500/DX4600 SERIES DIGITAL VIDEO RECORDER
The DX4500/DX4600 can be updated to support the optional KBD300A keyboard. You can use the keyboard to operate PTZ cameras connected to
the unit.
NOTE: DX4500/DX4600 version 1.2 DVR hardware cannot be updated to support the Pelco C (Coaxitron
®
) protocol feature.
DS CONTROLPOINT
Pelco’s KBD300A keyboards can be used to control certain functions of the DS ControlPoint software. To use a KBD300A with DS ControlPoint,
your hardware and software must meet the following requirements:
• KBD300A version 5.7 or later
• DS ControlPoint version 6.7.1.99 or later
• Available serial port (COM) on the computer running DS ControlPoint
MODELS
PARTS LIST
KBD300USBKIT KBD300A adapter (120 VAC)
KBD300USBKIT-X KBD300A adapter (230 VAC)
Qty Description
1 USB to RS-232C cable
1 PV140 RS-232 to RS-422 converter kit
1 KBDKIT/KBDKIT-X wiring kit (includes two RJ-45 wall blocks and a 120 VAC/230 VAC to 12 VAC transformer)
1 PV140 power supply (not used)