12 Pelco Manual C544M (2/98)
3.5 CONNECTING VCRs TO THE VIDEO MATRIX BAY
(CM9760-MXB)
VCRs must be connected to the CM9760-MXB (Video Matrix Bay). Two standard
coaxial cables are needed:
(1) One to run from the VIDEO OUT port on the back of the VCR to the desired IN
port on the VMB.
(2) The other to run from the VIDEO IN port on the VCR to the desired OUT port
on the Video Matrix Bay.
Figure 10. Connecting VCRs to the CM9760-MXB (Video Matrix Bay)
VCR (REAR VIEW)
CM9760-MXB
VIDEO MATRIX BAY
OUTPUT PORTS
(1 CARD, 16 PORTS PER CARD)
INPUT PORTS
(UP TO 16 CARDS, 16 PORTS PER CARD)