Pelco C652M (7/99) VCR User Manual


 
Pelco Manual C652M (7/99) 41
Figure 25. Playback Controls
1. Set the VIDEO switch to either COLOR or B/W. When
B/W is set, color recordings are played in black and
white.
2. Load a pre-recorded tape. (If the erasure prevention
tab has been removed, the VCR automatically begins
playback mode.)
3. Press the PLAY button to start playback.
4. Press the REC/PLAY MODE (+) or (-) buttons to select
the desired playback mode.
A tape recorded in SP mode cannot be played back
in 6H or L18H mode.
A tape recorded in EP mode cannot be played back
in 2H or L24H mode.
5. Press the STOP button to halt playback.
Turn the SHUTTLE ring to the left to rewind the tape
when the VCR is in stop mode.
Turn the SHUTTLE ring to the right to fast forward
the tape when the VCR is in stop mode.
9.0 PLAYBACK
9.1 PLAYBACK PROCEDURE
REW
FF
JOG/ADJUST
CLEAR/ ENTER/
SHUTTLE
REC
STOP
PLAY
POWER
EJECT
PICTURE
TRACKING
POSITION/
VERTICAL
ADJUST
REC/PLAY
MODE
COUNTER
RESET
COUNTER MEMORY/
SKIP/INDEX
PAUAE
SHUTTLE HOLD
DISPLAY
TIMER REC
VIDEO
SOFT
SHARP
COLOR
B/W
SHUTTLE ring