Filter
Top Products
78 Pelco Manual C690M-E (11/04)
OPERATING PRESETS
1. On the Live Video screen, click the button of the camera you want to control.
2. Using the on-screen number pad, click the number of the preset you want to run. Click
Go.
3. You can clear the preset number from the display window by clicking either C button on
the number pad.
PROGRAMMING PATTERNS
You can program as many patterns as your PTZ camera allows. Do the following:
1. Click the Live Video button.
2. Select a PTZ camera by clicking its button.
3. Hold down the mouse button and move the mouse to position the camera to your starting
location. Release the button.
4. Using the on-screen number pad, assign an identifier to the pattern.
5. Click the Program button. The program will overlay the picture with a programming
message.
6. Place the cursor in the picture again and move the camera as desired.
7. Click End to finish programming the pattern.
OPERATING PATTERNS
1. On the Live Video screen, click the button of the camera for which you want to run a
pattern.
2. Using the on-screen number pad, click the number of the pattern you want to run. Click
Run.
3. To end, move the camera or select another camera.