Filter
Top Products
12 C1602M (6/04)
2. Attach the silver part label that came in your upgrade kit to the inside of your DVR’s front door.
a. Remove the paper backing from the part label.
b. Carefully place the label, adhesive-side down, on a free section of the inside of the door.
c. Press down firmly to ensure that the label properly adheres to the inside of the door.
NOTE: In the event that your unit or its components require service, part labels must be present and
appropriately affixed to the unit’s door. Pelco product support personnel use these labels to identify
the exact components installed in your system. A separate part label is required for each upgrade
component installed on the DX8000.
Figure 11. Product Label
DX8000-256RAM
04070-FDF-C6B6