Filter
Top Products
Pelco Manual C2428M-A (2/01) 7
SPECIFICATIONS
ENCLOSURE
Camera Mounting: Multiple holes on adjustable camera sled; camera sled mounts in
threaded strip for easier removal and can be inverted for additional
camera elevation.
Camera and
Lens Size: Accommodates camera and lens combinations (including BNC connector)
2.87 (W) x 3.00 (H) x 9.00 (L) inches (7.28 x 7.62 x 22.86 cm)
Viewing Window: Lexan
®
, .187-inch (4.75 mm) thick, optically clear, impact-resistant,
MR5 coated (U.L. 94HB rated).
Viewing Area: 2.25 (H) x 2.63 (W) inches (5.71 x 6.68 cm)
Cable Entry: Two PG13.5 compression glands on the bottom of the enclosure;
maximum cable diameter 0.47-inch (1.19 cm).
Cable Entry Holes: .875-inch diameter; will accept 0.50-inch (1.27 cm) conduit fitting when
compression gland is removed.
Latch: Link-lock, stainless steel, can be secured with padlock (not supplied).
GENERAL
Construction: Extruded and die-cast aluminum body
Dimensions: Refer to Figure 2
Ratings: EMA 4, IP 66
Environment: 10° to 120°F (-23° to 49°C)
Weight: 4 lb (1.75 kg)
MOUNT
Pan Adjustment: 360°
Tilt Adjustment: ± 75°
Construction
Mounting Arm: Die cast aluminum
Tilt Table and
Support Bracket: Aluminum
Finish: Gray polyester powder coat
Maximum Load: 20 lb (9 kg)
Dimensions: See Figure 3
Unit Weight: 2 lb (.91 kg)
Environment: Indoor/outdoor
(Design and product specifications subject to change without notice.)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE IN INCHES.
2.75
(6.99)
1.50
(3.81)
Ø .281 (7.13),
3X
2.86
(7.26)
Ø .343 (.87),
1X
1.25
(3.18)
11.08
(28.14)
10.53
(26.75)
2.95
(7.49)
5.43
(13.79)
1.40
(3.56)
2.80
(7.11)
2.00
(5.08)
Ø .272 (.69), 3X
1.64
(4.17)
3.28
(8.33)
3.48
(8.84)
Figure 3. Mount Dimension DrawingFigure 2. Enclosure Dimension Drawing
5.1
(13.0
3.8
(9.86
2.0
(5.08
12.75
(32.38)
11.25
(28.57)
14.75
(37.47)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE IN INCHES.