Filter
Top Products
C2652M (1/08) 7
REAR PANEL
Figure 4 illustrates the rear panel of the FT8332/FR8332 unit.
Figure 4. Rear Panel of FT8332 Transmitter/FR8332 Receiver
For additional information about rear-panel connections, refer to Installation on page 8.
ì Video Connectors 1-32: BNC connectors that provide 75-ohm analog video input (FT8332)/output (FR8332).
î Fiber Optic Connector: An ST multimode or single-mode connector.
ï Auxiliary Relay Output Connector: A 3-pin header that provides a relay output to external equipment if an optical signal or laser fault
occurs.
ñ Stand-Alone Power Connector: A 5-mm barrel connector for power connection of stand-alone unit. Accepts electrical power from an
external 12 VDC power supply (provided) or from a 24 VAC power supply.
ó Rack Power Connector: A 6-pin connector that accepts electrical power from an EIA rack-mounted power supply such as the Pelco 12 VDC
EPS5000-120 power supply.