Filter
Top Products
C2925M-B (1/07) 7
Installation
The monitor can be placed on any flat surface (desk or table), or it can be rack mounted or wall mounted.
NOTE: Only use a recommended rack mount kit, such as PMCL-RM17, PMCL-RM19, or PMCL-WM. To rack-mount the monitor, follow the
instructions supplied with the rack mount kit. Refer to manual C2220M for rack mount kit instructions or C2219M for wall mount kit instructions.
DESKTOP STAND
You can manually adjust the 200 Series monitor to the viewing angle you want by repositioning the foot stand on the back of the monitor.
REAR PANEL CONNECTORS
ᕡᕢ
ᕣ
ᕤ
ᕤ
Figure 1. Rear Panel Connectors
1. AC IN: Can be connected to a 100-240 VAC, 50/60 Hz source.
2. VGA IN: Can be connected to the VGA cable (supplied).
3. AUDIO IN: Can input stereo audio from any sound source.
4. Speakers: The unit has two built-in speakers.
VIDEO AND POWER CONNECTIONS
Refer to Figure 1 for video, audio, and power connections.
1. Connect a PC or DVR to VGA IN on the back panel of the monitor.
2. Connect audio. Connect the audio cable from the stereo output source to the AUDIO IN connection on the back panel.
3. Connect power. Plug the provided power cord into the AC IN connection on the back panel. Plug the other end of the cord into a power
receptacle.