Filter
Top Products
2
FUNCTION KEYS
KEY SYMBOL DESCRIPTION
POWER ON/OFF
MUTE
VOLUME +/-
CHANNEL +/-, C/P +/-
CHANNEL 1/2 DIGIT MODE
A/V SOURCE 1
INFORMATION/INDEX
NORMAL
HELP
PLAY
STOP
PAUSE
FAST FORWARD (SKY™ MENU RIGHT)
REWIND (SKY™ MENU LEFT)
SKY™ MENU UP
SKY™ MENU DOWN
RECORD (red circle)
TELETEXT ON
TV ON (FROM TEXT TO TV)
MIX (TV AND TELETEXT COMBINED)
HOLD PAGE (TELETEXT)
REVEAL (TELETEXT)
UPDATE (TELETEXT)
TIMER (TELETEXT)
TOP OF PAGE (TELETEXT)
BOTTOM OF PAGE (TELETEXT)
FASTEXT RED
FASTEXT GREEN
FASTEXT YELLOW
FASTEXT BLUE
CHANNEL/PROGRAMME STORE
CHANNEL/PROGRAMME STORE
C/P (CHANNEL PROGRAMME)
SHIFT KEY FUNCTIONS
KEY STROKES FUNCTION
SHIFT +/- (COLOUR)
SHIFT +/- (BRIGHTNESS)
SHIFT +/- (CONTRAST)
SHIFT Shift 1-9 contain the following
groups
of functions
10+, 20+, 30+, 40+ ...
11, 12, 13, 14, 15 ...
PLEASE NOTE: You are advised to read the following
instructions fully, before attempting to program your
Universal Remote Control. The set-up procedure will cancel
itself if no keys are pressed for more than 10 seconds in
order to protect your code against accidental re-program-
ming, and to conserve battery power. It would therefore be
helpful to you to understand the required programming
steps, before you carry out the actual set-up procedure.
1. DEVICE INDICATOR keys 5. Number keypad
2. STATUS INDICATOR 6. Text & VCR keypad
3. Infra red transmitter 7.
Colour,Brightness,Contrast
4. Battery compartment 8. Fastext keys
MAGICIAN
–
UNIVERSAL REMOTE CONTROL
Congratulations! Your Universal Remote Control is a state-of-
the-art device, which replaces the main functions of several
separate remote controls to operate infra-red controlled
televisions (TV), videos (VCR) & satellite receivers (SAT).
Your Universal Remote Control (URC) is pre-programmed in
the factory. Simply enter the correct device codes for your
equipment and your URC is ready to use. A DEVICE CODE
LIST is included in the user’s manual.
INSTALLING BATTERIES
Your URC requires 2 fresh AAA-size (LR03) batteries (alka-
line batteries recommended) :-
1. Remove the battery cover on the back of your URC.
2. Insert the batteries ensuring that the polarity
corresponds with the markings in the battery
compartment.
3. Push the battery cover back in place.
HOW TO SET UP YOUR URC
The 4WAY has 4 Device Modes (TV, VCR, SAT & AUX)
Your URC can be set-up either by entering the appropriate
codes from the list of codes supplied or by using the Library
search facility. Instructions for the use of both methods follow.
91
...
MAIN FEATURES
-/--
2
4
1
3
5
6
8
7)
Record