Filter
Top Products
5
Tuning in to channels
Quick installation (first use)
The following operations are all described in the enclosed quick
installation guide. We advise you to use it.
The first time you switch on the television, a menu appears on the screen.
This menu asks you to choose the language of the other menus.
If the menu does not appear, hold down P and P buttons on the set for
four seconds to bring it up.
æ Use the keys numbered to on the remote control to choose your
language (for English, press ). Another menu appears.
 Select your country (for GB, press ).
ê As soon as your country is entered, tuning in starts automatically.
The operation takes a few minutes. A display shows the search status and
the number of programmes found. When it has finished, the menu
d i s appears and the last programme is displaye d .
If no programmes are found, refer to the Tips chapter on p. 16.
® If the transmitter or the cable network broadcasts the automatic sort
signal, the programmes will be correctly numbered.
† If not, the programmes found will be nu m b e r ed in descending order start i n g
at 59, 5 8 ,5 7 ,e t c.
Use the SORT m e nu to re number them.
Some transmitters or cable networks broadcast their own sort parameters (region,
language, etc.).Where this is the case, make your choice using the keys and
confirm with .
æ Press the menu key.The main menu is displayed.
 Press once to select INSTALLATION, then press, .
The INSTALLATION menu appears.The LANGUAGE option is activated.
ê Press three times to select SORT and then press .
The SORT menu appears.The FROM option is activated.
® Select the programme you wish to re n umber using keys or to .
Example: to renumber the programme 58 as 2, press .
† Selection option A (key ) and enter the new number with keys or
to (for the example given, press ).
Ú Select EXCHANGE (key ) and press .The message EXCHANGED
ap p e a r s , the exchange takes place ( to cancel). In our example pro g r a m m e
58 is nu m b e red as 2 (and programme 2 as 58).
º Select the option FROM key (key ) and repeat stages ®to Ú as many
times as there are programmes to renumber.
î To exit from the menus, press .
To renumber the programmes found