Filter
Top Products
7
Tuning in to FM radio stations
Automatic tuning
æ Press j on the remote control to change to radio mode.The screen
goes blank.
 Press to bring up the main menu.
The menu appears with the INSTALLATION option highlighted.
ê Press .The INSTALLATION menu appears with the AUTOSTORE option
highlighted.
® Press .The search begins.The operation takes a few minu t e s .The display
demonstrates the progession of the search and the number of FM s t a t i o n s
fo u n d . When it has finished, the I N S TA L L AT I O N m e nu re ap p e a r s
a u t o m a t i c a l ly.
If no stations are found, refer to the Tips chapter on p. 16.
† You can now, if you wish, store and number your stations as required: see
the following chapter.
Ú To exit the menus, press .
æ Ensure that the set is in radio mode (j).
 Press .The list of radio stations appears with their frequencies.
You can also access this list via the SORT menu in the INSTALLATION menu.
ê Use or to select the radio station you wish to renumber.
Example: to renumber station 6 as 1: press .
To access other radio stations, select <> (using ) and press to display the
following pages or for the previous pages.
® Press to confirm.The line is displayed in white.
† Select the radio station you wish to change with.
In our example, press .
Ú Press to confirm.The line is displayed in white.
º Press OK to confirm.Radio station No.6 is re nu m b e red as 1
(and No.1 as 6).
î Repeat steps ê to º as many times as there are stations to renumber.
œ To exit the menus, press .
To renumber the radio stations