Filter
Top Products
Tracking during playback
a During playback, press the MENU button.
b Select the line ’Tape’ with the buttons P r= or
P q; and confirm with the SqP button.
c Select the line ’Tracking’ with the buttons P r= or
P q; .
d Hold the buttons QSr or SqP until the
playback quality is at its best.
e Confirm with the OK button.
f To end, press the MENU button. This setting will remain
until you remove the cassette.
Tracking during still picture
If the still picture vibrates vertically, you can improve the still
picture as follows:
a During still picture, press the MENU button.
b Select the line ’Tape’ with the P r= button or
P q; and confirm with the SqP button.
c Select the line ’Jitter’ with the P r= or Pq;
button.
d Hold the QSr or SqP button until the picture
quality is at its best.
e Confirm with the OK button.
f To end, press the MENU button.
DPlease note, however, that interference may still
occur with poor quality cassettes.
Cleaning the video heads
If horizontal lines appear on the screen when you play a
cassette, you should clean the video heads.
a During playback, press the MENU button.
b Select the line ’Tape’ with the menu buttons P r= or
P q; and confirm with the SqP button.
c Select the line ’Cleaning’ with the menu buttons
P r= or Pq; .
d Press the OK button. ’CLEANING’ appears on the
screen.
e Wait a few seconds, until the message disappears and
then press the MENU button.
14