Filter
Top Products
Use programmed recording to automatically start and stop a
recording at a later date.
To make a programmed recording, your TV-VIDEO Combi
needs to know:
* the date you want to make the recording;
* the programme number for the TV channel you want to
record;
* the start and stop time of the recording;
* the recording speed (SP/LP).
The TV-VIDEO Combi stores all the information in a TIMER
block. You can programme up to 6 TIMER blocks a month in
advance.
Programming a recording
a Press the TIMER k button on the remote control.
b Select the line ’TIMER PROGRAMMING’ withthe
menu buttons P r= or P q; and confirm with the
SqP button.
TIMER PROGRAMMING
DATEPROG. START END LP REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
-- -- --:-- --:--- -----
ã Exit: Start:
« press TIMER press è
c Press the SqP button.
TIMER PROGRAMMING
DATEPROG. START END LP REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
15 xxx 15:36 15:50 - ONCE
ã è Store:
« press OK
d Select the entry field with the QSr or SqP
button.
e Enter information with the menu buttons P r= or
P q; or with the digit buttons 0-9 .
DUnder ’REP.’, use the P r= or Pq; button to
select daily or weekly programming.
’ONCE’: Recording only once.
’Mo-Fr’: Recording from Monday to Friday.
’Mo-Su’: Recording from Monday to Sunday.
’WEEKL’: Recording every week on the same day.
DUnder ’LP’, use the P r= or Pq; button to
select the recording speed ’SP’ or ’LP’.
DWhen you are recording, the red recording light at
the front panel of the TV-VIDEO Combi will be lit.
f Confirm with the OK button when the information is
correct.
E ’Press STANDBY to start recording’
will appear in the display. If the programmed recording
should start within the next few minutes, press
STANDBY m . If the programmed recording should start at
a later point in time, press the OK button.
DA programmed recording can only start when the
machine is switched to standby.
DIf you entered the wrong date for a daily/weekly
recording, your TV-VIDEO Combi will correct it
automatically.
g If you have confirmed with the OK button, use the
TIMER k button to exit the menu.
DThe programming information has been stored in a
TIMER block.
h Make sure that the cassette you have put in can be
recorded on.
7. PROGRAMMED RECORDING (TIMER)
17