Filter
Top Products
12
EN
General information
Use a TIMER programming to automatically start
and stop a recording at a later time or date. The
TV-Video Combi will switch to the right pro-
gramme number and begin recording at the cor-
rect time. With this TV-Video Combi, you can
pre-programme up to eight recordings within a
period of one year. To make a programmed
recording, your TV-Video Combi needs to know:
* the date you want to make the recording
* the programme number of the TV channel
* the start and stop time of the recording
* VPS or PDC on or off [14PV235/21PV385]
This information is saved in a ‘TIMER’ block.
Programming a recording
1.
1.Press . The main menu will appear.
2.
2.Select ‘TIMER’ with or .
Then press .
3.
3.Select ‘ONCE’, ‘DAILY’ or ‘WEEKLY’ recording
with or .Then press
.
4.
4.Select TIMER block with .
5.
5.Enter the Start time (START), End time
(STOP), Programme number (PROG) and the
Date (DATE) with .
6.
6.When all inputs are correct, press
. The programming information
is stored in a TIMER block.
7.
7.Insert a cassette with an intact security tab
(unprotected).
8.
8.Switch off with .
The programmed recording will only function
when the TV-Video Combi is switched off with
.
How to check or delete a pro-
grammed recording (TIMER)
1.
1.Press . The main menu will appear.
2.
2.Select ‘TIMER’ with or .
Then press .
3.
3.Select ‘TIMER LIST’ with or
, and confirm with
.
4.
4.Select timer block with .
5.
5.To cancel the recording, press .
6.
6.To end, press .
7.
7.Switch off with .
STANDBY/ON
yy
STATUS/EXIT
CLEAR
FWD 1- B
FWD 1- BSTOP C-L
PLAY B-K
FWD 1- B
STOP C-LPLAY B-K
MENU
STANDBY/ON
yy
STANDBY/ON
yy
STATUS/EXIT
0..9
0..9
FWD 1- B
STOP C-LPLAY B-K
FWD 1- B
STOP C-LPLAY B-K
MENU
7. Programming a recording (TIMER)
[14PV235/21PV385]
What is ‘VPS/PDC’?
‘VPS’ (Video Programming System)/ ‘PDC’
(Programme Delivery Control) are used to con-
trol the start and duration of TV channel record-
ings. If a TV programme starts earlier or ends
later than scheduled, the video recorder will
turn on and off at the correct time.
What do I need to know about ‘VPS/PDC’?
Usually the VPS or PDC time is the same as
the start time. But if your TV guide shows a
VPS or PDC time which is different from the
programme’s scheduled start time, e.g. 20.10
(VPS/PDC 20.14), you must enter the VPS/PDC
time exactly to the minute. If you want a start
time different from the VPS/PDC time, you must
switch VPS/PDC off.
SELECT KL CHOOSE B
→
ONCE
DAILY
WEEKLY
TIMER LIST
END=EXIT
Error message : ‘FULL’
• If this error message appears after you select
‘ONCE’, ‘DAILY’ or ‘WEEKLY’ on TIMER menu
and press , then all TIMER blocks
are already programmed. No more recordings
can be programmed. If you want to clear or
check a programmed recording(TIMER block),
select the programme number on TIMER LIST
menu and press .
CLEAR
FWD 1- B
SELECT KL CHOOSE B
ONCE
DAILY
WEEKLY
→TIMER LIST
END=EXIT
Timer block disappeared when I pressed
.
You have checked all the programmed recordings. If
you want to check them again, repeat steps 1 to 4.
FWD 1- B
Selecting ONCE/DAILY/WEEKLY recordings
‘ONCE’: Recording once
‘DAILY’: Repeated daily recordings from
Monday to Friday
‘WEEKLY’: Repeated weekly recordings (every
week on the same day)
Programming a recording from the external
sources
You can also programme recording from an
external source via the Scart socket AV1 or the
front A/V connectors AV2.
T6460/550/552EZ(EN)_EST.qx3 04.1.28 4:15 PM Page 12