Filter
Top Products
Setting the clock
If the display shows an incorrect time or ‘ --:-- ‘
the time and date must be reset manually.
1.
1.Press .The main menu will appear.
2.
2.
Select ‘GENERAL SET UP’ with
and confirm with .
3.
3.Select ‘CLOCK’ with and
confirm with .
[14PV235/ 21PV385]
4.
4.Check the time in ‘TIME’. If required, please
change the time with .
5.
5.Check ‘DAY’, ‘MONTH’ and ‘YEAR’ in the
same way.
6.
6.Choose ‘SMART CLOCK’ ON or OFF with
. [14PV235/21PV385]
7.
7.To end, press
.
STATUS/EXIT
FWD 1- B
0..9
FWD 1- B
STOP C-LPLAY B-K
FWD 1- BSTOP C-L
PLAY B-K
MENU
TIME --:--
DATE --/--/--
SMART CLOCK [ON]
END=EXIT
Time/date is displayed incorrectly despite
manual setting
•
With Smart Clock, if you save a TV channel
that transmits TXT/PDC on programme num-
ber
‘P01’, date and time will automatically be
updated when the TV-Video Combi is in
Stand-by
.
If you wish to switch this automatic time cor-
rection off, select ‘OFF’ for Smart Clock.You
can reactivate this function at any time by
selecting Smart Clock ‘ON’.
4. TV set functions
Selecting a TV channel
Select the desired TV channel (= the programme number) with
or with on the remote control.
Selection of the scart socket
To select the Scart socket, please enter 0,0,1,
with the keys on the remote control. AV1
appears on the screen.
Selection of the front A/V sockets
To select the front A/V sockets, please enter
0,0,2, with the keys on the remote control.
‘AV2’ appears on the screen.
Volume control
You can adjust the volume using ,
on the remote control.
Picture settings
The picture can be adjusted according to your
personal preferences.
These settings are automatically stored after
exiting the main menu.
1.
1.Press the . The main menu will appear.
2.
2.Select ‘PICTURE CONTROL’ with
and confirm with .
3.
3.Select an item using , and
then modify with .
4.
4.To end, press .
‘TINT’ appears only when receiving NTSC sig-
nals from another source.
STATUS/EXIT
FWD 1- BREW0- s
STOP C-LPLAY B-K
FWD 1- BSTOP C-L
PLAY B-K
MENU
VOL5–
VOL5+
0..9
0..9
0..9
PROG P–PROG P+
If you would like to change the volume on the
machine, press or on the TV-Video Combi.
If you want to mute the sound temporarily (e.g.:during
a telephone call), press on the remote control.
When you press again, the sound will return
at its original volume level.
MUTE
MUTE
5+5–
SELECT KL ADJUSTE s
/
B
BRIGHTNESS < >
CONTRAST < >
COLOUR < >
SHARPNESS < >
TINT < >
END=EXIT
[14PV235/ 21PV385]
If a TV channel that transmits VPS/PDC or the
Teletext is stored under programme number
'P01', time/date will automatically be taken from
the VPS/PDC or the Teletext information.
(SMART CLOCK)
EN
8
T6460/550/552EZ(EN)_EST.qx3 04.1.28 4:15 PM Page 8