Filter
Top Products
DUnder ’VPS/PDC’, use the AP q or P rB
button to switch ’VPS or PDC’ on or off.
f Confirm with the OK button when the information is
correct.
g Confirm the message on the screen with the OK button.
A TIMER recording can only start, if the set is not used for
other video recorder functions (e.g. playback).
DThe programming information has been stored in a
TIMER block.
h To end, press the TIMERk button.
i Make sure that the cassette you have put in can be
recorded on.
How to check or change a TIMER
a Press the TIMERk button on the remote control.
b Select the line ’Timer programming’ with the
buttons AP q or P rB and confirm with the
SqC button.
c Select the TIMER you want to check or change with the
AP q or P rB button and confirm with the OK
button.
d Select the entry field with the DSr or SqC
button.
e Change any information with the AP q or P rB
button or with the 0-9 buttons.
DUnder ’LP’, use the AP q or P rB button to
select the recording speed ’SP’ or ’LP’.
f Confirm with the OK button.
g To end, press the TIMERk button.
h Make sure that the cassette you have put in can be
recorded on.
How to clear a TIMER
a Press the TIMERk button on the remote control.
b Select the line ’Timer programming’ with the
buttons AP q or P rB and confirm with the
SqC button.
c Select the TIMER you want to clear with the buttons
AP q or P rB .
d Press the CLEAR button.
e Switch off with the TIMER k button.
18