Filter
Top Products
Manual TV channel search
In certain cases the ’Automatic TV channel search’ may not be
able to find all of the TV channels (e.g. coded TV channels). In
that case, use this manual method to set the channels.
a Press the MENU button on the remote control. The main
menu will appear.
b Select the line ’Installation’ with the AP q or
P rB button and confirm with the qSC button.
c Select the line ’Manual store’ with the AP q or
P rB button and confirm with the qSC button.
MANUAL STORE
Channel/Frequency FREQU.
Search 125
Fine tuning (,,,,,,n=,,,,,,$
Name edit xxx
Programme number P01
Decoder OFF
ã Exit:
« press MENU
d In the line ’Channel/Frequency’, select the
display for:
’FREQU.’: frequency
’CCH’: channel
’SCH’: special channel
e If you know the frequency or channel of the desired TV
channel, you can enter the data in line ’Search’ with
the digit buttons 0-9 .
DIf you don’t know the frequency or channel of the TV
channel of your choice, press the qSC button to
start the channel search.
f In the line ’Programme number’ select the
programme number you want e.g.: ’P01’, using the
DSr or qSC button.
g If you want to change the TV channel name, press the
qSC button in line ’Name edit’.
E Select the character you want to change with the
DSr or the qSC button. Change the character
with the AP q or the P rB button. Select the next
character in the same way.
E To confirm the information, press the OK button.
h If you want to change the automatic tv channel setting,
select the line ’Fine tuning’.
With the DSr or qSC button you can vary the
automatic tv channel setting. Important: This re-tuning is
only necessary and useful in special cases, e.g.: when
there are stripes on the picture with cable-TV systems.
i Press the OK button to store the TV channel.
DIf you want to search for further TV channels, start
again at step e.
j To end, press the MENU button.
Satellite receiver
You can receive channels from the satellite receiver via the
scart socket EXT.1 .
To do this, select the channel number ’E1’ with the
P pAB button. You will have to select the channels to be
received by the satellite receiver on the receiver itself.
Automatic TV channel search
Your TV-VIDEO Combi will search for all TV channels.
If you want to start the automatic TV channel search again,
then follow the instructions below.
a Press the MENU button on the remote control. The main
menu will appear.
b Select the line ’Installation’ with the AP q or
P rB button and confirm with the qSC button.
c Select the line ’Autoinstall’ with the AP q or
P rB button.
d Press the qSC button. The ’Automatic TV channel
search’ starts.
Searching...
CHANNELS FOUND:
//////,,,,,,,,,,,,,,,,,,,,,
e When the TV channel search is complete,
’Installation comp.’ will appear on the
screen.
How to search for a TV channel manually, you can read in the
section ’Manual TV channel search’.
6