Filter
Top Products
Playing a cassette
a Put a cassette into the cassette slot.
b Press the PLAY G button.
c If you press the STOPh button once, the TV-VIDEO
Combi will switch to pause. To stop, press the STOPh
button again.
d To eject the cassette, press the ? button on the
TV-VIDEO Combi or press the STOPh button on the
remote control several seconds.
DSome hired cassettes may have a poor picture or
poor sound quality. This is not a fault in your
machine. Please read ’Eliminating picture
interference’.
DSome functions switch off automatically after a
while (for example, pause, still picture, picture
search). This helps to protect the cassette and
avoids wasting power.
Playing NTSC cassettes
With this set you can play cassettes that have been recorded
on another video recorder in the NTSC standard (for example,
American cassettes).
DSome special features (for example, still picture) are not
possible while you are playing an NTSC cassette.
Tape position indication
DPress the OK button to display the current tape position.
DTo change the type of tape position display, proceed as
follows:
a During playback, press the MENU button.
b Select the line ’Tape’ with the menu buttons P rB or
AP q and confirm with the SqC button.
c Select the line ’Tape counter’ with the menu
buttons P rB or AP q .
d With the menu buttons DSr or SqC select
’USED’ to check the time used, or ’LEFT’ to check the
time left on the tape.
e Confirm with the OK button.
Searching for tape position with the picture
(picture search)
a While a cassette is playing, press the H (reverse) or
I (forward) button once or several times.
b To stop at a certain picture, press the PLAY G button.
DDuring picture search, the picture quality may not be
so good and there will be no sound.
Still picture
a Press the STILL R button. A still picture will appear on
the screen.
b Each time you press STILL R again, the picture will
move on one step.
6. PLAYBACK FUNCTIONS
13