Filter
Top Products
10 EN
Switch channels
Press P +/- on the remote control or
P/CH +/- on the side of the TV.
Enter a channel number using the
Numeric buttons.
Press OK to use the channel grid.
Note
When you use a favourite list, you can only
select those channels in the list.
Switch channels with the channel grid
The channel grid allows you to view all
available channels in a grid format.
1 Press OK.
» The channel grid appears.
2 Press to browse the channel grid.
3 Press OK to select a channel.
4 Use your TV
This section helps you perform basic TV operations.
Switch your TV on / off or to
standby
To switch on
If the standby indicator is off, press
(Power) at the side of the TV.
If the standby indicator is red, press
(Standby-On) on the remote control.
To switch to standby
Press
(Standby-On) on the remote
control.
» The standby indicator switches to red.
To switch off
Press
(Power) at the side of the TV.
» The standby indicator switches off.
Tip
Though your TV consumes very little power
when in standby, energy continues to be
consumed. When not in use for an extended
period of time, disconnect the TV power cable
from the power outlet.
Note
If you cannot locate your remote control and
want to switch on the TV from standby, press
P/CH +/- on the side of the TV.