Filter
Top Products
27
8. Clone
With cloning it is possible to copy to/from a USB device TV the configuration data and the channel list data. Place a
USB Memory stick in the USB side connector of the TV.
*USB device should be formatted as FAT or FAT32.
Access the Professional menu by pressing the ‘RC5 SETUP’ key, and then press the ‘Home/Menu’ button.(For the
guest remote control, press the following keys in sequence: 3,1,9,7,5,3, ‘MUTE’). Access the Professional settings and
go to:
[USB to TV]
1. Select [USB to TV] and press OK.
2. The clone data will be loaded from the USB device into the TV. To activate the loaded settings, wait until
the OSD message is displayed to remove the power cord.
3. Remove and re-insert the power cord.
[TV to USB]
1. Select [TV to USB] and press OK.
2. The clone data will be loaded from the TV into USB device.
3. Wait until the OSD message returns to its earlier state before removing the USB device
Instant initial clone:
A TV out of the box will trigger the instant initial cloning. Before connecting the power cord and power on the TV,
insert the USB key with cloning data. After power on the TV will search on USB key for cloning files, will clone and
will power down. After power down you can remove the USB key and power on the TV to check the result of the
cloning and correct functionality of TV (e.q: Welcome message, welcome logo, hotel info, starting channel, startup
volume).
Instant initial cloning and software upgrade:
For instant initial cloning and software upgrade the files
on the USB key should be:
a. “T91HE_CloneData” folder
b. upgrade_loader.pkg
Steps to follow for a new TV:
1. Mount the TV in place
2. Insert the USB key on the side USB port
3. Plug in the mains power cord
4. Power on the TV (a “software upgrading in
progress” message will appear)
5. The TV will reboot and display the installation
wizard, after 3 second the message “Instant
initial cloning” will appear.
6. TV will reboot again to apply settings;
You can then remove the USB key.
7. You are now done. TV has the last software
version installed and all settings cloned from the
master TV.