Filter
Top Products
28
9. Feature settings
[Multi RC]
This function allows that up to four televisions can be installed in a room whereas every TV will listen to its own RC.
Once the TV is set, also every RC can be set to remember its connected TV:
[Off] This function is not used; all TVs will listen to a ‘blue’ RC.
[Blue] The TV will listen to a ‘blue’ RC. Press and hold both the menu and blue button on the RC for about
five seconds.
[Green] The TV will listen to a ‘green’ RC. Press and hold both the menu and green button on the RC for
about five seconds.
[Yellow] The TV will listen to a ‘yellow’ RC. Press and hold both the menu and yellow button on the RC for
about five seconds.
[Red] The TV will listen to a ‘red’ RC. Press and hold both the menu and red button on the RC for about five
seconds.
Press and hold OK button for about five seconds to check the current color off the Multi Remote settings of TV and
user remote.
[MyChoice]
With MyChoice it is possible to activate two channel rings: R0 when MyChoice PIN is valid, and R1 if not.
[Off]: Single channel map as configured during channel installation.
[On] Channel ring R0 to be available to guest in case of valid PIN entered; R1 if not.
[Theme TV]
With Theme TV it is possible to activate a customizable user interface to select up to 15 different themes that
contains Channel references. Theme TV can be presented on the display by means of pressing the Theme TV button
on the RC, or automatically after starting up the TV:
[On]: Show Theme TV on the display after pressing the Theme TV button on the RC.
[Off]: Theme TV disabled.
[Startup]: Show Theme TV on startup and able to show the Theme TV by pressing the TTV button on the RC.