Filter
Top Products
32
Each package can be configured independently without having any influence on other packages, but you have to
keep in mind that after activation the TV will show only the channels which are ticked for this package.
Press Menu to exit the Professional menu and store all settings.
5. Check the MyChoice functionality.
Power ON the TV and wait to see the Switch on channel. Press the MyChoice button on the remote control.
The following window will appear on TV:
Enter the pin code received from the website or generated with a scratch card. After entering the pin code press OK
to submit the code.
If the pin code is correct, the following message will be displayed. Also the message will display the remaining
viewing time.
After few seconds the message will disappear and the channel grid will pop up showing all channels available. The
MyChoice channels will have a star inside the box.
If you enter an invalid pin code or an expired pin code the following message will be displayed.
Note: If you do a power cycle of the TV and press the MyChoice button again, you can enter the same pin code if this
code is still valid.
Important remark: If you enter a new pin code, the previous code will become invalid despite the fact that code
could be still valid.
Example: If you enter a pin code for Package 1 valid for 24 hours and after 4 hours you entered a pin code for
Package 2, the pin code for Package 1 will become invalid; the TV will report the message above.
The TV will only save the last pin code entered; the previous ones will become expired.