Filter
Top Products
No Power
" Check the TV power cord. Unplug'[he TV, wait l0
seconds, then reinsert the plug into the outlet and
push the POWER button again.
, Check that the outlet is not on a walt switch.
, Be sure the fuse is not btown on the AC power
strip, if one is being used
No Picture
Check antenna/cable connections. Are they properly
secured to the TV's ANT75Q plug_
, Check the TUNER NODE control for the correct
tuner setting.
, Try running the Auto Prograrn feature to find all
_vaitable channels.
, Press the AV button on the remote to make
sure the correct signal source is selected,
, If using an accessory device, be sure that it is
functioning properly.
, If in PC PIode, a video signal MUST BE present or
the TV wilt turn off
No Sound
. Check the VOLUME buttons.
. Check the MUTE button on the rernote control.
. Ifyou're attempting to hook up auxiliary
equipment, check the audio jack connections.
No AV Signal
, Check whether AV and S-Video sockets connected
simultaneously. If they are, disconnect the S-Video
socket. AV signal automatically overrides the S-Video
signal if both sockets are connected simultaneously.
SoVHS Color Becomes Faint
Unplug socket for S-Video connection. Reconnect
the S-Video socket of the TV carefully to the VCR
socket.
TV Onmy Produces MONO Sound
.Ifusinga cablebox with RF onlytype connections,
the signal corning from the cable box will be
produced in MONO only.
Check Sound control setting. Change setting to
Stereo.
Remote Does Not Work
Check the batteries. Ptace lithium ceil in the
remote. Be sure the (+) and (-) ends of the batteries
line up as marked inside the battery compartment.
Ctean the remote control and the rernote contro!
sensor window on the TV.
. Check the TV power cord. Unplug the TV, wait l0
seconds,then reinsert the plug into the outlet and
push the POWER button again.
Be sure the fuse [s not btown on the AC power
strip, if one is being used.
Check to be sure the TV outlet is not on a wall
switch.
Be sure that the remote is in the correct operating
mode.
Be sure the remote is pointed at the Remote
Sensor Window on the TV. See page 2.of the Quick
Use OuideFor details.
TV Displays Wrong Channel or No Channels
Above 13
. Repeat channel selection.
. Add the desired channel numbers (using the
CHANNEL EDIT control) into the TV's memory.
. Check to be sure the TUNER MODES are set to
the CABLE option and run the Auto Program
feature to find all available channels
31
Downloaded From TV-Manual.com Manuals