Filter
Top Products
DUnder ’VPS/PDC’, use the B or A button to
switch ’VPS or PDC’ on or off.
DUnder ’LP’, use the B or A button to select the
recording speed ’SP’ or ’LP’.
DThe TIMER lamp on the front of the set lights up
when one or more of the TIMER blocks are
occupied.
DWhen you are recording, the red recording light at
the front of the TV-VIDEO Combi will be alight.
DIf the end of the cassette is reached during a
recording, the TV-VIDEO Combi automatically ejects
the cassette.
DIf you forget to load a cassette, ’No cassette’
will appear.
DIf you inserted a cassette with erase protection
when you want to start a recording, the cassette will
be ejected.
g Press the OK button.
h Confirm the message on the screen with the OK button.
A TIMER recording can only start, if the set is not used for
other video recorder functions (e.g. playback).
i To end, press the TIMER s button.
Programming a recording (without
’VIDEOPlus’)
a Press the TIMER s button on the remote control.
b Select the line ’Timer programming’ with the
menu buttons B or A and confirm with the C
button.
TIMER PROGRAMMING
VPS
DATEPROG. START END LP PDC REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
-- -- --:-- --:-- - - -----
ã Exit: Start:
« press TIMER press è
c Press the C button.
TIMER PROGRAMMING
VPS
DATEPROG. START END LP PDC REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
15 xxx 15:36 15:50 - * ONCE
ã Exit: Start:
« press TIMER press è
d Select the entry field with the D or C button.
e Enter information with the menu buttons B or A or
with the digit buttons 0-9 .
DUnder ’REP.’, use the B or A button to select
daily or weekly programming.
’Mo-Fr’: Recording from Monday to Friday.
’Mo-So’: Recording from Monday to Sunday.
’WEEKL’: Recordings every week on the same day.
DIf you want to make a TIMER-recordings from an
external source, use the B or A button to select
the setting ’Record prepared’ in the entry
field ’PROG.’. Your TV-VIDEO Combi will now be
controlled via the scart cable.
DUnder ’VPS/PDC’, use the B or A button to
switch ’VPS or PDC’ on or off.
DUnder ’LP’, use the B or A button to select the
recording speed ’SP’ or ’LP’.
f Confirm with the OK button when the information is
correct.
g Confirm the message on the screen with the OK button.
A TIMER recording can only start, if the set is not used for
other video recorder functions (e.g. playback).
DThe programming information has been stored in a
TIMER block.
h To end, press the TIMER s button.
i Make sure that the cassette you have put in can be
recorded on.
16