Filter
Top Products
First-Time Setup, Watching TV 11
The TV/VCR/DVD can memorize available TV channels.
If you are using a Cable Box or Satellite Receiver, you do not
need to set channels at the TV/VCR/DVD. Set the
TV/VCR/DVD to the output channel of the Cable Box or
Satellite Receiver (channel 03 or 04 or AUX). Then select
channels at the Cable Box or Satellite Receiver.
These screens appear only the first time you turn on the
TV/VCR/DVD.
1
Press STANDBY-ON to turn on the
TV/VCR/DVD.
2
Press ENTER to select ENGLISH (ENG),
ESPANOL (ESP), or FRANCAIS (FRA).
The selected language will appear inside the [ ].
This will be the language of the TV/VCR/DVD setup
menus.
3
Press ▲ or ▼ to select AUTO PRESET.
Then press ENTER. The TV/VCR/DVD scans and
memorizes available channels.
When scanning is complete, the TV/VCR/DVD will go
to the lowest available channel. Or, to stop the chan-
nel scanning, press SETUP.
4
To watch TV, press the CH. ▲/▼ buttons to
select memorized channels. Memorized channels are
those that appear when you flip through channels. If a
channel is skipped, you still can use the Number but-
tons to select it. This is a non-memorized channel; it
may have weak reception in your area.
Remember, if you are using a Cable Box/Satellite
Receiver, set the TV/VCR/DVD to channel 3, 4, or
AUX. Change channels at the Cable Box/Satellite
Receiver.
5
Press VOL. ▲/▼ to adjust the volume.
VOLUME 20
– SETUP –
LANGUAGE
[ENGLISH] ESP FRA
AUTO PRESET
B
– SETUP –
LANGUAGE
[ENGLISH] ESP FRA
AUTO PRESET
B
• If the power fails, you may need
to repeat this first-time setup.
• The first-time setup menus only
appear the first time you turn on
the TV/VCR/DVD. To set up
channels or change the menu
language later, see page 18.
• To select channels above 99,
press the +100/+10 button,
then press the Number buttons
for the last two digits. For
example, to select channel 125,
press +100/+10, 2, 5. Precede
single-digit channel numbers with
a zero (for example, 01...09).
• If you do not want to set up the
language and channels now,
press the SETUP button on the
remote to remove the menus.
See page 18 later to set the
menu language and TV channels.
Helpful Hints
PLAY
STOP
ENTER
RECORD
DISC
MENU
RETURNTITLESETUP
A
-
B
REPEATSEARCH MODE
CLEAR
MODE
ANGLESUBTITLEAUDIO
DISPLAY
SPEED C.RESET
STANDBY-ON
PICTURE SELECTSLEEP
CH.
VOL.
MUTE
ZOOM
123
456
789
0 +10
+100
REPEAT
PHILIPS
2-3
1
4
5