Filter
Top Products
15
TV / VCR / DVD mode selector
Carry out the connections featured opposite.
Using the N key, select EXT3 for a VHS or 8mm
c a m c o rder and S-VHS3 * for an S-VHS or Hi-8 camcord e r.
* Only available on certain versions.
For a mono set, connect the sound signal to the AUDIO L (or
AUDIO R) input.The sound automatically comes out of the left
and right speakers of the set.
Headphones
The @ ” # keys allow you to adjust the volume on
the headphones and on the set. Press m if you want to
cut off the sound on the set.
The headphones must have an impedance of between 32 and
600 ohms.
Connecting other appliances
& Set the switch on the side of the remote control to
the required mode:TV,VCR (video recorder) or DVD.
é Then press one of the following keys:
standby
contrast + setting *
enter a number
bring up a menu *
select (I J) and set (K L) *
select programme,
· record *,
¢ rewind,
Ê stop,
Æ play,
∫ fast forward,
% programming *,
OK confirm*
∆ pause
* Some programming functions are not available on all
models (cursors, menu, OK key,etc.). For video recorders
equipped with the Easylink function: when the set is on
standby,pressing the Æ or H key once switches it on
automatically.The remote control is compatible with all
the video recorders in our range as well as models which
use the RC5 signalling standard.
The remote control allows you to control the main functions of your video recorder or DVD.