Filter
Top Products
3
The remote control keys
List of programmes
To display/clear the list of pro g r a m m e s .
Use the keys I Jto select a
p rogramme and the key Lto display it.
The symbol + is displayed alongside
all programmes which are locked (p. 1 0 )
or ? if they are not locke d .
key not used
Mode selector (p.15)
To activate the remote control
in TV,VCR (video recorder) or
DVD mode.
Select EXT sockets
P ress several times to select
E X T 1 ,EXT2 and EXT3,S-VHS2
and S-VHS3.
Smart sound controls
To access a series of settings:
VOICE,MUSIC,THEATRE and
return to PERSONAL
Menu
To display or exit from the menu s
Cursor
These 4 keys are used to move
within the menus or to have
d i rect access to the 16:9 fo r m a t s
(p 12).
Mute
To disable or enable the sound.
Volume
To adjust the sound level
Sound mode
To switch from STEREO to
MONO or to choose between
Dual I and Dual II for
bilingual transmissions.
For TV sets fitted with NICAM
reception,depending on the
transmission,you can switch
from NICAM STEREO to
MONO or choose between
NICAM DUAL I, NICAM
DUAL II and MONO.
When the sound mode is switched
to MONO,the indication is
displayed in red.
Contrast +
To activate / de-activate the
automatic contrast adjustment
system (the dark areas are made
d a r ker whilst maintaining the detail).
Standby
To set the TV to standby mode.
To switch the TV set on again,
press P @ # or 0 9.
Numerical keys
For direct access to programmes.
For a 2 digit programme number,
the 2
nd
digit must be entered
before the dash disappears.
Smart picture controls
To access a series of settings:R I C H ,
N AT U R A L ,S O F T,M U LT I M E D I A
and return to PERSONAL.
Surround sound
To select the different surround
modes (see p.9)
.
Selecting TV programmes
To move up or down a pro g r a m m e.
The nu m b e r,(the name) and the sound
mode are displayed for a few seconds.
For some TV programmes the title of
the programme appears at the
bottom of the screen.
Teletext features (p.11)
Previous programme
To access the previously viewed
programme.
16:9 formats (p.12)
Screen information
To display / re m ove the pro g r a m m e
nu m b e r,the name (if it exists),t h e
t i m e,the sound mode and the time
remaining on the timer.Hold dow n
for 5 seconds to permanently
d i s p l ay the programme number on
the scre e n .The volume level and the
s m a rt control adjustments are then
d i s p l ayed each time they are used.
Sleeptimer
To select the length of time
before the set automatically
switches to standby (from 0 to
240 minutes)