Philips 29PT9417 CRT Television User Manual


 
21
Care of the screen
Clean the TV with a slightly damp soft cloth. Do not use abrasive solvent as it can
damage the TV screen.
Poor Picture
Have you selected the correct TV system?
Is your TV or house aerial located too close to loudspeakers, non-earthed audio
equipment or neon lights, etc.?
Mountains or high buildings can cause double pictures or ghost images.
Sometimes you can improve the picture quality by changing the direction of the
aerial.
Is the picture or teletext unrecognisable? Check if you have entered the correct
frequency. See Installation,p. 6.
Are brightness, sharpness and contrast out of adjustment? Select Factory
settings in the Setup, General menu,p. 8.
Sometimes poor picture quality is possible when having activated an S-VHS
camera or camcorder connected to the right side of your TV and another
peripheral is connected to
EXT 1
,
2
or
3
at the same time. In this case switch
off one of the other peripherals.
No picture
Is the aerial connected properly?
Are the plugs tightly connected in the aerial socket?
Is the aerial cable in good condition and does it have suitable plugs?
Are the connection facilities to a possible second TV in good condition? If in
doubt, consult your dealer.
No sound
No sound on any channel? Check the volume isnt at minimum.
Is the sound interrupted with the mute key ¬?
No solution found
Switch your TV off and then on again once. Never attempt to repair a defective
for your picture or
TV yourself. Check with your dealer or call a TV technician.
sound problem ?
Remote control
If your TV no longer responds to the remote control, the batteries may be
dead.
Check if the remote control is in the correct mode.
You can still use the
M
key and the -/+ keys at the top of your TV.
Menu
Have you selected the wrong menu? Press the
MENU
key again to exit from
the menu.
NEXTVIEW No NEXTVIEW info:
See Acquisition and updating of NEXTVIEW information, p. 15.
Displayed time is wrong:
The broadcaster on programme number one does not transmit the correct local
date and time. Use Reshuffle in the installation menu to place another broadcaster
on programme number one.
Standby Your TV consumes energy in the standby mode. Energy consumption contributes
to air and water pollution.
Power consumption: 1 W.
Tips
2195.1 gb 03-03-2003 09:57 Pagina 21