Filter
Top Products
25
Installation
The STEP TUNING feature allows
tuning to be performed for each digit
entry if YES is selected.
• Press the > button to select STEP
TUNING.
CONTROL
ESP 2
AUDIO / VIDEO MUTE
YES
STEP TUNING YES
DIGIT TIMEOUT 3 . 0
AUTO SCART
NO
ALWAYS RGB NO
MIN VOLUME 0
MAX VOLUME 99
• Press the > button to select YES
to activate STEP TUNING function.
The DIGIT TIMEOUT feature allows
you to specify a time period (from 1
second to 9.9 seconds) for the channel
to switch to another channel when you
key in the channel number. It is advisable
not to specify too short a time period
especially when you want to key in a
2- digit channel number. For example, if
you specify a 1 second time period, you
may not have enough time to key the
second digit as the channel will switch
after you key in the fi rst digit.
Note : The recommended and default
setting is 3.0 seconds.
• Press the > button to select
DIGIT TIMEOUT.
CONTROL
ESP 2
AUDIO / VIDEO MUTE
YES
STEP TUNING YES
DIGIT TIMEOUT 3 . 0
AUTO SCART
NO
ALWAYS RGB NO
MIN VOLUME 0
MAX VOLUME 99
• Press the < or > button to specify a
time period.
In the AUTO SCART feature, the
TV will automatically switch to the
designated source where scart signal
at the designated source is detected.
• Press the > button to select
AUTO SCART.
• Press the < or > button to select
NO, AV1 (EXT 1), AV2 (EXT 2),
ALL or POWER SCART.
CONTROL
ESP 2
AUDIO / VIDEO MUTE
YES
STEP TUNING YES
DIGIT TIMEOUT 3 . 0
AUTO SCART AV1
ALWAYS RGB NO
MIN VOLUME 0
MAX VOLUME 99
If AV 1 (EXT 1) is selected and you are
watching TV from the RF source, the TV
switches automatically to the AV1
channel when a scart cable is connected
to a AV1 connector.