Filter
Top Products
35
NOTE: Before installing a System
SmartCard or System Box, ensure the
TV is switched off.
1. Inserting the System SmartCard or
System Box
Insert the SmartCard into the
SmartCard slot on the rear of the TV
(available for certain models only) and
connect the other cables as directed by
the System provider.
After the SmartCard has been inserted
and the cables connected, switch on the
TV.
Sample of
System
SmartCard
For For the System Box, insert the
RJ12 cable of the System Box to the
DATA 11 (RJ12) connector on the rear
of the TV and connect the other cables
as directed by the System provider.
After all the connection of cables are
completed, switch on the TV.
•
•
•
•
Installing a System SmartCard or System Box
Connect to the Data 1 (RJ 12)
connector at the rear of the TV.
Sample of
System Box
2. Setting up the correct
Communication Source
Note: The default setting in the
Communication menu is OFF. If a
System SmartCard or System Box is used
with this TV, the Communication menu item
must be set to the correct
communications protocol. For purposes of
providing an example only, SP - I2C
is selected as the communications protocol.
In the SETUP menu, select
COMMUNICATION.
Press the > button to enter
COMMUNICATION menu.
Press the > button to select
SP - I2C.
COMMUNICATION
COMMUNICATION SP - 12C
STORE >
ENABLE CARD SLOT NO
DCM TYPE GENERIC
•
•
•