Philips 32PFL4907 Flat Panel Television User Manual


  Open as PDF
of 67
 
English
34
Note
• Digitalcaptionservice that you can switch differs depending on the broadcast
description.
• Closed Captioning service may not be controlled by this unit’s menu options if you are
watching television through an external cable or satellite set-top box. In which case
you will need to use the menu options on the external set-top box to control Closed
Captioning.
• The captions do not always use correct spelling and grammar.
• Not all TV programs and product commercials include Closed Caption information.
Refer to your area TV program listings for the TV channels and times of Closed Caption
shows. The captioned programs are usually noted in the TV listings with service marks
such as CC.
• Not all captioning services are used by a TV channel during the transmission of a
Closed Caption program.
• Closed Caption will NOT be displayed when you are using an HDMI connection.
• To show the Closed Caption on your TV screen, broadcast signal must contain the
Closed Caption data.
• Not all TV programs and commercials have the Closed Caption or all types of the
Closed Caption.
• Captions and texts may not exactly match the TV voice.
• Changing channels may delay the Closed Caption for a few seconds.
• Adjusting or muting the volume may delay the Closed Caption for a few seconds.
• Abbreviations, symbols and other grammatical shortcuts may be used in order to keep
pace with the on-screen action. This is not a malfunction.
• The caption or text characters will not be displayed while the Home menu or functions
display is shown.
• If a black box appears on the TV screen, this means that the Closed Caption is set to
the text mode. To clear the box, select CC-1, CC-2, CC-3 or CC-4.
• If the unit receives poor quality television signals, the captions may contain errors or
there might be no captions at all. Some possible causes of poor quality signals are:
– Automobile ignition noise
– Electric motor noise
– Weak signal reception
– Multiplex signal reception (ghosts or screen flutter)
– Data dropout and Pixelation (for DTV only)
• The unit retains the Closed Caption setting if the power fails.
• When the unit receives special effects playback signal (e.g. Search, Slow and Still) from a
VCR’s video Output channel (ch3 or ch4), the unit may not display the correct caption
or text.
Sleeptimer
Sleep timer can set the unit to go into Standby mode after an
incremental period of time.
1 Use ▲▼ to select Sleeptimer, then press OK.
2 Use ► repeatedly to change the amount of time
(increases the time by 5 minutes up to 180 minutes).
• Each press of ◄ will decrease the time by 5 minutes.
• Press INFO once to call up the display for checking the
remaining time.
• To cancel the sleep timer, press ► repeatedly until “ 0 ” is
displayed.
Note
• You can also press SLEEP directly to switch the desired setting.
➠
p.25
Childandratingslock
You can prevent your children from watching certain programs or
certain channels by locking the TV controls and by using ratings.
1 Use ▲▼ to select Childlock, then press OK.
Picture Caption settings Closed captions
Sound Sleeptimer
Features Child lock Channel lock
Installation
Change PIN Start now
Software
2 Use theNUMBERbuttons to enter the 4-digit numbers for your
PIN code.
• When you have not set up your PIN code, enter 0, 0,0,0.
• When the PIN code is correct, Childlock menu is displayed.
See the following description for setting each item.
Caption settings Channel lock
Select
Sleeptimer TV ratings lock
Select
Child lock Movie ratings lock
Select
Change PIN
Canada English ratings lo
Select
Canada French ratings lo Select
Region ratings lock Select
Note
• When you select the higher rating and set it to , the lower ratings will be blocked
automatically.
• When you set the All to , all ratings return to automatically.
• Regionratingslock will be available when the unit receives a Digital broadcast using
the new rating system.
• To block any inappropriate programs, set your limits in TVratingslock,
Movieratingslockand Regionratingslock.
• The child lock setting will be retained after a power failure or after the power is
removed for longer than 10 seconds.
• For the United States, the unit may download the Region Ratings Lock Table, if required.
• The Canadian rating systems on this unit are based on CEA-766-A and CRTC policy.
Continued on next page.
 previous next