EN 38
5 Connect the TV
First connections
Power
NonPublish
Be sure that the power plug in the wall
socket is accessible at all times. When
disconnecting the power cable, always pull
the plug, never the cable.
Although this TV has a very low standby
power consumption, switch off the TV using
the power switch on the bottom of the TV if
you do not use the TV for a long time.
Antenna
NonPublish
Locate the antenna connector at the back of
the TV. Insert the antenna cable securely
into the antenna connector.
Note: To receive DVB-S broadcasts, insert
the antenna cable into the SAT (DVB-S)
connector on the side of the TV. This is
available on certain models only.
About cables
Overview
NonPublish
Before you connect devices to the TV, verify
which connectors are available on the
device. Connect the device to the TV with
the highest quality connection available.
Good quality cables ensure a good transfer
of picture and sound.
The connections shown in this user manual
are recommendations only. Other solutions
are possible.
Tip: If your device only has composite/RCA
connectors, use a SCART-cinch adapter to
connect the device to a SCART connector
on the TV.
Downloaded From TV-Manual.com Manuals