Filter
Top Products
REMOTE CONTROL BUTTON DESCRIPTIONS
Select (VCR DVD SAT AMPACC) -
Press to set
the TV
this button to cycle across the accessory
mode dial. Stop pressing when the mode you desire
is lighted. The light will stay on for 2 seconds and
then begin blinking to indicate the remote is in your
desired mode. Once the mode is selected, you must
press a button within 60 seconds for the remote to
remain in the selected mode or it will default back to
the TV mode.
SLEEP Button - Press to set the TV to automatically
turn itself OFF at a given amount of time.
AV
(4)
Button - Press repeatedly to select the dif-
ferent signal sources connected to the A/V inputs on
the TV.
SOUND Button - Press to select an AutoSound™
control. Choose from four factory-set controls
(Speech, Music, Movie, and Multimedia) and a PER-
SONAL to tailor the TV sound to enhance the particu-
lar type of program you are watching.
ACTIVE CONTROL
(7)
Button - Press repeatedly
to toggle the Active Control to ON , Display Logo,
Display On, and Off. When ON, the sharpness and
noise reduction will be continuously monitored.
Cursor Buttons (Left, Right, Up, Down) - Press
these buttons to highlight, select, and adjust items on
the TV's onscreen menu. Also, press the left or right
cursor buttons to adjust the picture format.
Menu (Select) Button - Press for the onscreen menu
to appear. Pressing the menu button after menu selec-
tions are made will eliminate the menu from the dis-
play.
Volume (+) or (–) Buttons - Press to adjust the TV
sound level.
Number Buttons - Press the number buttons to select
TV channels. When selecting single-digit channels,
press the number of the desired channel. The TV will
pause for a few seconds and then tune to the selected
channel. (Note: You can press 0, then the number
also.) For channels 100 and above, first press 1 then
the next two numbers of the desired channel.
SMILEY Button - Press to add channels in the
“QuadraSurf” lists. Works with all colored buttons.
Rec(ord)/SAP Button - Press to start the recording of
a videotape. Also, this button activates or deactivates
the SAP feature (if available).
(Virtual Dolby) Button - Press to set various
factory Surround Sound listening modes.
PIC(TURE) SIZE Button - Press to adjust the picture
format.
NOTE: These buttons are dedicated to the PIP feature
within certain models. This TV does not contain these
PIP features, therefore these buttons will have no func-
tionality when pressed.
OK
1
2
3
4
5
6
7
8
0
9
Select
SLEEP
ACTIVE
CONTROL
CC
AV
CLOCK
MENU
EXIT
PICTURE
SOUND
STATUS
SELECT
PIC SIZE
MAIN
FREEZE
QuadraSurf
TM
PROGRAM
LIST
TV/VCR
REC
SAP
A/CH
SATVCR AMPACCDVD
VOL CH
MUTE
Power
1