Philips 36PW 9308 Flat Panel Television User Manual


 
9
& Press the cursor right to select Picture.
é Select the menu items in the Picture menu with the cursor
up/down.
Adjust the settings with the cursor left/right or enter the list of
submenu items with the cursor right. Select a submenu item
with the cursor up/down.
Note:To remove the menu background before adjusting the picture
settings, see Select TV setup, General, p. 7.
Smart picture
Select
Smart picture to display a list of predefined picture
settings, each corresponding with specific factory settings.
Personal refers to the personal preference settings of picture in
the picture menu.
Digital options
Pixel Plus is the most ideal setting, doubles the horizontal
resolution and increases the number of lines with 33%.You may
consider to select Movie Plus in case a halo effect should
disturb you. Dependent on your own preference, select Double
lines, or 100 Hz Digital Scan.
Note:When 60 Hz NTSC material is used, the options are changed
to Pixel Plus, Movie Plus or Progressive, progressive scan without
motion compensation.
TV menu
Press the MENU Ï key on the remote control to summon the main menu.
Press the i key on the remote control to get information about the selected menu item.
Picture Sound Features
Smart picture
Contrast
Brightness
Colour
Sharpness
Tint
Digital options
Dynamic contrast
DNR
Colour enhancement
(Hue)
Picture format
TV
Active Control
The TV continuously measures and corrects all incoming signals in
order to provide the best picture possible.
& Press the h key on the remote control.
é The Active Control menu appears.
Press the cursor up/down to select the Active Control values
Off, Minimum, Medium (recommended) or Maximum.
The picture settings are being optimised continuously and
automatically which is displayed by bars.The menu items can
not be selected.
Press the cursor right to select Smart Picture.
( Press the cursor up/down to select one of the predefined
picture settings.
§ Press the cursor right to select Active Display.
è Press the cursor up/down to select Show bars, one of the
Dual screen demos or
Off.
When you select Dynamic contrast, Pixel Plus, Digital Noise
Reduction or Digital Natural Motion, the TV screen is divided
into two parts: in the left part the selected picture quality
setting is switched off; in the right part it is switched on.
! Press the h key again to switch off the Active Control menu.
Picture menu
2224.1 gb 11-02-2003 08:55 Pagina 9