Philips 42-3D6W02/00 Flat Panel Television User Manual


 
Display User Manual
3D Solutions
23 September 2008
12 of 26 ©2008 Philips Electronics Nederland B.V.
3 Scope of supply, Set up and mounting
3.1 Scope of Supply
The contents of the box:
o Display 42-3D #
o Table stand
o 3 Mains cords (USA, EU and UK)
o DVI cable
o CD ROM with:
Display Control Tool
3DS Media Player
User manuals
3D Sample content
2
o Printed version of the Display user manual (this manual)
o Cardboard box with cushions
The following items can be purchased separately:
o Mounting bracket (Article code: 42-WM)
3.2 Image retention
IMPORTANT: Always display alternating content with your application. If a still image in high contrast
remains on the screen for an extended period of time, it may leave an 'after-image' or 'ghost image' on
the front of the screen. This is a well-known phenomenon, caused by the shortcomings inherent in the
LCD technology. Please note that the after-image symptom cannot be repaired and is not covered
under warranty.
3.3 Installation locations
o Avoid exposure to excessive heat and extreme cold.
o Do not store or use the product in locations exposed to excessive heat, direct sunlight or
extreme cold.
o
Avoid moving the product between locations with large temperature differences. Choose a
site that falls within the following temperature and humidity ranges.
Temperature: 0-35°C
Humidity: 20-80% RH
o Do not subject the product to severe vibration or high impact conditions. Do not place the
product e.g. inside a car, car boot or trunk.
o Take care not to mistreat this product by either hitting it or dropping it during operation or
transportation.
o Do not store or use the product in locations where there is a high level of humidity or in
dusty environments. Do not allow water or other liquids to spill on or into the product.
2
More sample content can be downloaded from http://www.wowvx.com, http://www.philips.com/3D or the
Extranet at http://www.philips.com/3dsolutions
(registration required).