Filter
Top Products
• Language: Select the language of the installation menu. Options are "ENGLISH" and
"MELAYU".
• Communication: The Communication option is for enabling interactive applications. For
more information consult the application notes. For stand-alone applications select “OFF”
option under the Communication sub menu.
Important!
Do not select
Iconn1
mode unless application is with Iconn 1 box. Once the T
V
is set in Iconn1 mode, it will not respond to RC commands anymore. To regain control over
the TV, press any key (except the Power key) on the Set-Up remote for about 4 seconds and
while continuing to hold the key, press any key (except the Power key) on the local keyboard.
A
message “IR Loopback” will appear momentarily to indicate that the set has been released
from
Iconn1
mode.
• No. of Channels: This sub menu allows setting the number of TV, PAY-TV, Radio and
Info channels.
• Channel Install: In the Channel Install sub-menu, various channel settings can be set. Please
refer to the section on Channel Installation for further details.
• Configuration: In the Configuration menu, various settings and features of the TV can be
adjusted. Please refer to the section on Configuration for further details.
- 6 -