Filter
Top Products
3
2
3
Using the Remote Control
Pull out the plastic sheet from the
battery to
enable the remote control to operate.
Switching on the TV set
• To switch on the TV set, press the POWER
key. A green indicator comes on and the
screen lights up.
• If the TV set remains in standby mode (red
indicator), press the PROGRAM – /
+ key on
the keyboard or the P – / + key on the
remote control.
4
1
Preparation / Getting started
10 cm
10 cm
10 cm
Positioning the TV set
Place your TV set on a solid stable surface,
leaving a space of at 10 cm around the set.
Connections
• Insert the aerial plug into the 75Ω :
socket at the bottom of the set.
• Insert the mains plug into a wall socket
(220-240V / 50/60Hz).
NOTE
For more details on other
connections,
refer to the
connection guide “CONNECT”.
Do not remove the protective sheet until you have completed the stand/wallmounting and
connections. Please handle with care. Use only the soft cloth provided to clean the glossy
black front of the TV.
w