Filter
Top Products
15
Use TV lock
You can prevent your children from watching
certain programs or certain channels by locking
the TV controls.
Set or change the TV lock code
1 Press MENU.
2 Press to select [Features] > [Set
code].
3 Press to enter the code setup.
4 Enter your code using the Numeric
buttons.
5 Re-enter the same code in the new
dialogue box for confirmation.
If the code is set successfully, the »
dialogue box will disappear. However, if
the code cannot be set, a new dialogue
box will prompt you to re-enter the
code.
6 If you want to change the code, select
[Features] > [Change code].
7 Enter your current code using the
Numeric buttons.
If the code is validated, a new dialogue »
box will prompt you to enter your
new code.
8 Enter the new code using the Numeric
buttons.
A message appears prompting you »
to enter the new code again for
confirmation.
Tip
If you forget your code, enter ‘8888’ to •
override any existing codes.
3 Press to set the sleep time.
The sleeptimer can be up to 180 »
minutes in steps of five minutes. If
set to zero minutes, the sleeptimer is
switched off.
4 Press OK to activate the sleeptimer.
The TV switches to standby after the »
pre-defined period of time.
Automatically switch the TV on (on
timer)
You can switch the TV to a specified channel
at a specified time, from standby.
1 Press MENU.
2 Select [Features] > [On timer] .
3 Press to enter the [On timer] menu.
4 Press to select [Activate] and set a
frequency - [Daily], [Once] or [Off].
5 Press OK to confirm.
6 Press to select [Time] and set the
starting time.
7 Press [Done] to confirm.
8 Press to select [Programme no.]
and set the channel.
9 Press OK to confirm.
10 Press MENU to exit.
Tip
Select • [On timer] > [Activate] > [Off] to
disable [On timer].
When
• [On timer] is [Off], only [Activate] can
be selected.
Set the TV clock before activating
• [On
timer]feature (see ‘Set the TV clock’ on page
16).
English
EN