Filter
Top Products
‡ Switch on the TV.
® Insert the USB memory device to the USB
connector at the side of the TV.
Ò The TV switches off.The screen stays black for
about 10 seconds.Wait and do not use the
power switch B on the TV.
† The update process starts automatically. Please
wait.
The update is finished when the message
‘Operation successful’ appears on the screen.
º Remove the USB memory device from the TV.
◊Press B on the remote control.
Do not press more than once and do not use
the Power B switch on the TV.
‹The TV switches off.The screen stays black for
about 10 seconds. Please, wait.
≈The TV switches back on again.The update is
done.
5.11.2 Software update by digital broadcast
(DVB-T)
Your TV might receive new software from the
digital broadcast system automatically.
If you receive an update message on screen it is
strongly advised to update the software
immediately - select Now.
If you want to be reminded later on, select Later.
Select Cancel to quit the update (not
recommended). If you cancelled the update you can
still update yourself from the TV menu > Setup >
Software update > Local updates.
Use more of your TV 23
ENGLISH
BSU
BSU
B
S
U
Operation Successful! Re
P
r
g
B
S
U
BSU
2720.1 EN 15-05-2008 12:53 Pagina 23