Philips 55PP9753/17 Projection Television User Manual


 
4
®
®
®
®
Standby–On
Press to turn the TV on or off.
NOTE: The TV is never really powered off completely
unless it is physically unplugged from the power source.
Surround Sound
Press to display and toggle a list of available sound
modes. Choose from Incredible Surround™ and Dolby*
Virtual settings. (See page 42 in the Directions for Use
manual.)
VCR Functions
When the remote is in the VCR mode, these buttons will
allow you start a recording (), rewind a tape (ᮤᮤ),
stop the playback of a tape (), play a videotape (), or
fast-forward a videotape (ᮣᮣ).
Time Display
Press to display the current time on the TV screen.
CC (Closed Captioning)
Press to toggle Closed Captioning off, on, or on during
mute. (See page 64 in the Directions for Use manual.)
Cursor Up, Down, Right, Left
Use to navigate the on-screen menu and make control
adjustments or settings.
Additionally, use these buttons to pan the screen up or
down to show any excluded parts of the picture. Left or
right panning is possible with the Side input source when
“Game” is selected as the type of source for the Side
input.
Also use with the Dual Screen/PIP feature to select a
screen, as well as resize or reposition a PIP screen. (See
page 61 in the Directions for Use manual.)
Menu On/Off
Press to display the TV’s on-screen menu or to turn it off.
CH (Channel Selection)
Press to browse through the TV channels. If you press
and hold the channel will change slowly for five chan-
nels, then rapidly scroll through the channels. release the
button to stop.
Digit (Number Buttons)
Press to directly access a specific TV channel. For a two-
or three-digit channel, enter all numbers. Press a single-
digit button and hold a bit longer to directly access a sin-
gle-digit channel. These buttons can also be used to enter
values in certain on-screen menu controls.
PP (AutoSurf™)
If you set the Surf control in the TV’s on-screen menu to
two channels, this button will allow you to toggle between
the current channel and the last viewed channel. If you
choose the nine-channel Surf, pressing this button allows
you to access the Surf list, where you can add, remove,
and scroll up to nine of your favorite channels. See page
59 in the Directions for Use manual.
Picture Format
Press to display a list of available picture formats for
showing video images in the traditional 4:3 proportions.
Press this button repeatedly to select a picture format.
Choose from Automatic, Super zoom, Panoramic, 4:3,
Movie expand 14:9, Movie expand 16:9, 16:9 subtitle,
and Wide screen. See pages 35–36 in the Directions for
Use manual.
NOTE: To switch between a full or 4:3 letterbox picture
format in Dual Screen mode, press the Picture Format
button.
Active Control Plus
NOTE: Active Control™ Plus is not available for use
with the AV3 and AV4 input sources.
Press to display the Active Control Plus™ screen. With
the “Active Control” submenu selected, press the Cursor
Up or Down button to select Off, Minimum, Medium, or
Maximum. Maximum is the recommended option. Press
the Cursor Right button to select the “Auto Picture” or
“Active Display” submenus, then press the Cursor Up or
Down buttons to make selections. See pages 27-29 in the
Directions for Use manual.
Select (CBL VCR DVD SAT AMP) and Backlight
Press this button to cycle across the accessory mode dial.
Stop pressing when the mode you desire is lighted. The
light will stay on for 2 seconds and then begin blinking to
indicate the remote is in your desired mode. Once the
mode is selected, you must press a button within 60 sec-
onds for the remote to remain in the selected mode or it
will default back to the TV mode. Pressing and holding
the Select button for 2 seconds backlights the remote
control buttons. The buttons remain lighted for 5 seconds
after you press Select.
Source
Press to display a list of source options—TV, AV1, CVI,
AV2, AV3, AV4, or Side. If you have labeled the source
you desire, press the Source Select button to toggle to the
source. If you have not labeled the source, use the Cursor
Up/Down buttons to select the source, then press the OK
button to confirm.
Alternate Audio (SAP)
When you tune to a channel where SAP (Second Audio
Program) is available, you can toggle between Main and
SAP. If SAP is not available, the Alternate Audio menu
item cannot be selected. (See page 43 in the Directions
for Use manual.)
Pixel Plus Demo
Press to activate the demo, which illustrates the benefits
of Pixel Plus™. Press and the TV screen will be divided
in half displaying the Pixel Plus™ Demo. The left side
will show the picture with Pixel Plus™ switched off. The
right side of the screen will show the picture with Pixel
Plus™ switched on. Press the Pixel Plus™ button again
to turn the demo off. (See page 31 in the Directions for
Use manual.)
OK
Press to activate or confirm menu choices.
Freeze Format
Pressing will apply one of the Freeze modes you set
using the on-screen menu. See page 62 in the Directions
for Use manual.
Freeze mode stops action in the main screen. Sound
will continue to be heard. Press again to resume nor-
mal viewing.
Replay mode displays a few seconds of stored video
in the PIP window.
Photo Finish mode displays six stored frames from
the picture.
NOTE: Continuing to hold the Freeze Format button
down will cycle the TV through the Freeze modes:
Freeze, Replay, and Photo Finish.
VOL (Volume)
Press + or – to adjust the volume.
Mute
Press to interrupt or restore sound.
Information Plus+
Press to show information (when available) about the
current channel, program, source, number or name, local
time, CC availability, SAP availability, program ratings,
display format, sound mode, and remaining length of a
Sleeptimer setting.
Dual Screen/PIP (Picture-in-Picture)
Press to turn the PIP dual screen on or off. Continuing to
hold the Dual Screen/PIP button down will cycle through
the Dual Screen/PIP options. (See page 61 in the
Directions for Use manual.)
Remote Control Buttons
Active Control Plus, AutoSurf, Incredible Surround, and Pixel Plus are trademarks of Philips Consumer Electronics. Copyright 2003 Philips
Consumer Electronics. All rights reserved.
*Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Using the Remote Control