Filter
Top Products
8
Buttons in the 'Time Shift Buffer'
1 Press INFO to display the bar of the time shift buffer on the
screen.
2 The following buttons are available:
O N , O , PLAY G , PAUSE 9 , D , C , JUMP
FWD , JUMP BACK for navigation in the time bar.
O RETURN
You can jump back to the previous scene of the time shift
buffer or to playback from the HDD.
If you press this button again, you can switch to the picture of
the actual running TV show.
O TUNER
To switch to the actual TV show (live) of the selected TV
channel.
O T/C
Switching between title/chapter for selection using N ,
O . The top screen line displays either 'TITLE' for selecting
titles or 'CHAPTER' for selecting chapters
O REC/OTR n :
- To start a recording that will be stored on the HDD.
- To mark a title that will be stored on the HDD.
- Hold button down to start the recording from the actual
position.
O RED function button:
- To cancel the marked recording that was set with the
REC/OTR n button.
- Hold button down to stop the recording at the actual
position.
O YELLOWfunction button: ('OVERVIEW')
To display an overview of all content of the time shift buffer.
O BLUEfunction button:('MORE INFO'):
To display any additional information for the actual TV show
transmitted by the GUIDE Plus+
®
system.
Manual recordings
When you switch on the DVD recorder, the currently selected TV
programme will be recorded in the Time Shift Buffer.
In order to store a recording on the HDD, you must mark it red in the
Time Shift Buffer (time bar) before the Time Shift Buffer is deleted.
How can I delete the Time Shift Buffer?
- Switch off the recorder using STANDBY m
- Select the 'Flush Buffer' feature ( SYSTEM MENU button, 'Set
up' menu)
- The preset time of the Time Shift Buffer (1-6 hours) has expired
Starting a recording with data from the
GUIDE Plus+
®
system
The GUIDE Plus+
®
system provides the DVD recorder with data on
the start and end time of TV shows. These are shown as black bars on
the time bar.
1 In case the time bar of the Time Shift Buffer is not visible on the
screen, press INFO on the remote control.
2 Press REC/OTR n .
P The red light around the record button n on the front will
switch on.
P '1 Programm'will appear on the screen on the right end of
the time bar.
This indicates that the recording will automatically end at the
end of the TV show.
If you want to record the next TV show of the same TV
channel as well, press REC/OTR n again. '2 Programmes'
will appear.
Recording the previous TV show
If the DVD recorded has been on for some time, the Time Shift Buffer
already contains recordings. You can select those recordings (TV shows)
that you want to store on the HDD.
- Select the recording using C or D (indicator must be between the
markers)
- Press REC/OTR n to mark the recording.
You can remove the marker using the RED function button.
Quick install Guide