Filter
Top Products
User Manual BDL4771V
RETURN TO THE CONTENTS
1.4. MOUNTING THE DISPLAY
Wall mounting holes
Notes:
• M6 (10mm) screws (with a length 10-15mm longer than
the thickness of the mounting bracket) are needed for wall
mounting (not included). Tighten the screws securely
(recommended torque: 470 - 635N cm)
• The mounting interface should comply with the UL1678
standard in North America. The mounting means should be
strong enough to bear the weight of the display (approx. 34
kg (75.0 lb) without stands).
Note: The AC IN/OUT socket should be on top of all
connectors when rotating your display.
Allowable tilting angle in Portrait Mode
Note: When installing the display on the wall, please consult a
professional technician for proper installation. The manufacturer accepts
no liability for installations not performed by a professional technician.