Philips DCR 2020 DVD Player User Manual


 
64
EN
Connection for Easy Recording
This connection allows automatic recording without requiring you to program your
VCR or DVD recorder.You must, however, set a timer on your receiver as described
in paragraph Timers.
Prior to choosing this connection method:
Consult the user manual of your VCR or DVD recorder to check if and how
this feature is supported. Most Philips VCR and DVD recorders support one of
the two Easy Recording options.
Check that your TV and VCR or DVD are both fitted with two SCART sockets.
Incorporate your receiver in your existing installation as shown below:
- Screw the adapter supplied with your receiver on the “
RF IN socket of the rear
panel.
-
Connect the r
eceiver “
RF
IN
sock
et (with ada
pter) to the cable wall socket.
- Connect the “RF OUT socket of your digital receiver to the aerial input socket of
y
our
VCR or D
VD using the antenna cord type F-IEC.
- Connect the “
RF OUTsocket of your VCR or DVD to the aerial input socket of
your TV using a RF coaxial lead.
More about recording
(VCR or DVD control)
to AC outlet
PHILIPSPHILIPS
TV set
VCR/DVD
Cable Receiver
IN FROM ANT
OUT TO ANT
EXT 1
EXT 1 EXT 2
EXT 2
Cable Wall socket
For optimum configuration
DCR 2020_indice1 1/09/05 15:26 Page 64