Filter
Top Products
72
EN
9.9.1 Setting a timer in the EPG
- In the EPG, press TIMER once to set a recording on the selected programme that
is highlighted. Press TIMER once again to set a reminder on the programme.The
timer type is signalled in the highlight using icon for recordings or icon for
reminders. Press TIMER a third time to delete the timer.
When setting a timer on a locked channel, you will be prompted to enter your
password.
To edit a timer from the EPG:
- Move the highlight to the desired programme and press OK to access the Timer
Edition screen.
9.9.2 Cancelling an active timer
A timer is active; recording is signalled by the indication on the
display.
To delete the active timer:
- If your receiver is in standby,press P+, P-,TV/RADIO, or any number key.
- Press the key sequence TIMER then 0 to cancel the active timer.The
indication then disappears and you can change channels.
9.9.3 Your receiver is locked with the
indication shown on the front display
Your receiver is blocked because a timer is active.
- Press the key sequence TIMER then 0 to cancel the active time and recover full
control of your receiver.
9.10 Viewing teletext
- Press TEXT.
- Use number keys to select a page.
- Press TEXT to exit.
9.11 Checking or changing the video output
resolution setting
To check the current output resolution setting,press V-Format once.
In case the picture displayed is distorted, try switching between output resolution
settings by successively pressing V-Format.