Filter
Top Products
33
ACCESS CONTROL
With Access Control, you can lock or unlock the system, change the password, lock channels, set spending
limits, set maturity ratings, and replace the access card when requested by DIRECTV.
Press MENU.
The Guide option will be highlighted. Press ▼ to select Access Control.
Press OK.
Use the ▲ / ▼ buttons to choose from the selections.
Once you have made your selection, press OK.
Access to all of these functions can be restricted by a password. If the access code mode was
previously set to locked (details below) a lock icon displays in the banner.
You can view settings including Channel Lock, Purchase Limit, and Maturity Rating without
unlocking your system. However, you must unlock it to change any of these settings. Unlocking the system (if
locked) requires knowledge of the correct password.
Your Satellite Receiver can be locked or
unlocked.When it is locked, the system will
prompt you to enter the password whenever
you want to change settings in the following:
lock channels, change maturity levels, change
purchase limits, change the password, or
replace the access card.
A locked system is indicated by the lock icon in the
banner.To unlock the system, enter the password as
described below.
To lock or unlock the system:
Choose Lock/Unlock the System from the Access
Control menu.When the system prompts you for a
password, enter it using the numeric buttons on the
remote control.After the last digit is correctly
entered, the password is automatically validated.
Lock/Unlock The System
The password is four digits.You can change it at any-
time. Be sure to write it down in case you forget it.
To change your password:
Be sure you have unlocked the system using the
steps above.
Choose Change Password from the Access
Control menu and press OK.
Enter the current password using the numeric
buttons on the remote or by using the ᮤ / ᮣ
buttons to move from one field to another. Use
the ▲ / ▼ buttons to scroll password numbers.
Press OK.
Enter the new password.
You will be prompted to enter it again to verify
it. Press OK. Press BACK to return to the
previous menu.
Change Password